- BEHRINGER UCA202 AUDIO INTERFACE MICROPHONE SOFTWARE
- BEHRINGER UCA202 AUDIO INTERFACE MICROPHONE MAC
You can fix low levels later, but you cannot fix overloading, smashing, and clipping (meters too far to the right). Do not peak much over -10 to -6 on the Audacity meters. Play a record, play an instrument, or sing through the mixer. The only UCA202 control is headphone volume. The volume has to be set at the mixer or amp. The UCA202 has no volume controls for the audio being recorded or the audio being played on the computer. This may fail on certain Linux machines using Jack. They will display the microphone's sound level without starting Audacity recording and wasting drive space.
You may want to make the Audacity project window larger than its default and expand the Meter Toolbars.Ĭlick once anywhere inside the recording meter (the one with the mic icon) to put the meters into Monitor Mode.
BEHRINGER UCA202 AUDIO INTERFACE MICROPHONE SOFTWARE
uncheck Software Playthrough: Listen while recording or monitoring new track.check Overdub: Play other tracks while recording new one.
Under Recording set Device to USB Audio CODEC and set Channels to 2 (Stereo).Under Playback set Device to USB Audio CODEC.set Default Sample Format to 32-bit float.
BEHRINGER UCA202 AUDIO INTERFACE MICROPHONE MAC
The UCA202's name is USB audio CODEC.Ĭlick on Edit > Preferences (on a Mac this is Audacity > Preferences) Set the computer control panels, preferences and Audacity dropdowns to recognize the UCA202 USB device for both stereo recording and playback. There are multiple tutorials and wikis on Recording. This is not a tutorial on making a recording and playing it back, but you need to be able to do that before you do anything else. In this example we are using the sound mixer's Tape-Out for the connection.
If the USB device does not appear in Device Toolbar, check that the USB device is connected correctly and try applying Transport > Rescan Audio Devices. The UCA202 should be connected before you start Audacity. The UCA202 must have a direct connection to the computer USB audio will not go through a hub or long USB extension cables. The system has to work correctly for simple recording and playback before we go further. Making the USB device the playback device makes this functionality available.įirst we will make a simple recording, with no overdubbing or other fancy tricks. The one "magic" feature of this device is the ability to mix your live voice with the computer's rhythm track so you can hear the mixed musical performance and that can only happen if the rhythm track is available. It has an internal headphone mixer and mixes your existing track playback with your new, live performance so you can listen to both. It converts the USB digital audio from the computer back to stereo analog. It converts the mixer's stereo analog audio to digital and sends it down the USB cable for recording. Headphone monitoring is good live microphones and speakers in the same room is a recipe for feedback. You must get the headphone sound from the UCA202, not from the computer soundcard. If you require cranium-crushing headphone volume, you may need a headphone amplifier. Our example here uses Mac earbuds for listening, but nearly any good headphones or earbuds are OK. The mix is half-and-half and you cannot change it, so it may take some experimenting to get the headphone mix just right as you perform.Īlmost any Windows\xc2\xae, Mac\xc2\xae or Linux\xc2\xae machine with fast enough USB and good storage can be used. This is the mix you need to sing or play to yourself with no latency, echoes or other impairment. The UCA202 has a headphone connection and, when switched to Monitor-On, will mix sound from the computer playback with live performance sound. We will be using a stereo mixer as the example in this tutorial. It will work with a guitar pickup and the right cable adapters. It will not amplify a microphone or a turntable directly, and it will not work with a USB microphone and may not work with a USB mixer. The Behringer\xc2\xae UCA202 can be used for overdubbing and sound-on-sound by connecting your computer to your headphones and analog stereo mixer, turntable/CD DJ system, keyboard or other music production equipment. You will also need to use a short audio adapter cable during the system setup and adjustment: You will be connecting your already working sound system to the computer and Audacity through a special, required USB soundcard. This process uses your existing analog microphones, instruments, sound mixer or amp. If your USB soundcard does not have a headphone output, then you should follow the advice in Overdubbing using your computer's on-board sound card, but using your USB microphone rather than your computer's built-in microphone. The procedure is similar for any USB external soundcard providing that it has a headphone output and some way to mix the microphone signal with the USB playback signal.
0 kommentar(er)
